Fast Forwarding And Rewinding Cassette Tapes; Using Dolby B/C Noise Reduction; Switching Tape Types; Tape Counter Display - Kenwood KRC-PS978R Instruction Manual

Fast Forwarding and Rewinding Cassette Tapes

Fast Forwarding Tapes:
Press the FM button.
Rewinding Tapes:
Press the AM button.
Cancelling:
Press the PROG button.
NOR tape play returns.

Using Dolby B/C Noise Reduction

Listen to tapes recorded using the Dolby B or C NR system.
Turning Dolby NR On/Off:
Press the B-C NR button repeatedly to switch the Dolby NR
selection as follows.
Dolby B NR ON
Dolby C NR ON (KRC-PS978R Only)
OFF
The B NR indicator lights up when Dolby B NR is turned on,
and the C NR indicator when Dolby C NR is turned on.

Switching Tape Types

Select type of tape being played.
Switching Tape Types:
Press the MTL button to switch the MTL indicator on and off
and to select the tape type.
Turn the MTL indicator off for normal tape (Type I) playback.
Turn the MTL indicator on for the following tape types:
CrO (Type II) FeCr (Type III) Metal (Type IV)
2
Selecting the wrong tape type may cause sound quality to
suffer.

Tape counter display

Switching the Tape display :
Each time you press the DISP button, the display during tape
play switches as follows:
Play side/Tape counter
Date(KRC-PS978R/878R only)
Play side
Play side/Tape running
NOTE
The tape counter is not exact, but only represents an
approximation of the elapsed time.
— 21 —