Technology; Installation & Connection; Preparation; Voltage Converter Installation - AEG 1000 W Instructions For Use Manual

24 www.aeg-automotive.com
1. Red connection (+)
2. Black connection (-)
3. Mounting rail
4. Fan cover
5. 230 V Socket
6. Output socket LED, green
7. Error LED, red
8. Power LED, green
9. uSB port
10. Power button
11. Black cable with lugs (-)
12. Red cable with lugs (+)
13. Cordless remote control module
14. On/Off button (cordless remote control module)

TEChNOLOGy

Attention!
Check the properties of the device to be powered
before using the voltage converter to prevent con-
sequential damage.
There are pure or modified sinusoidal wave voltage
converters.
Model
Modified sinu- 1000 W,
soidal wave 1500 W
Pure sinusoi- -
dal wave
INSTALLATION &
CONNECTION

Preparation

Attention!
•
Before connecting the voltage converter you must
check the terminals on the vehicle's battery. The
voltage converter must not be used with vehicles
where the positive terminal „+" is connected to a
metal part of the vehicle.
•
Only use the included cables with lugs to connect
to the 12 V direct current supply (e.g. automotive
battery). If the cables included are too short you
may also use insulated copper cables available
from speciality retailers.
•
Keep the cable length as short as possible. The
suitable cable diameter must be selected ac-
cording to the length of the cable between the
inverter and the power source. When in doubt
please contact a speciality retailer.
•
Remember the vehicle's battery will be discharged
when the vehicle is not running.

Voltage converter installation

Install the power inverter with suitable screws (not
for connecting
(examples) included):
•
in sturdy and even locations,
• Power drills
•
on clean, dry and non-flammable surfaces,
• Computers
•
in well ventilated areas.
• hobs
• Lamps,
Please be sure not to cover the vents.
• Fans/vents
• Lawn mowers

Connection to the power source

in addition to the
Caution!
modified sinusoidal
wave examples
We urgently advise having an electrically skilled
• Coffee makers
person connect the cable to your vehicle's electrical
• Shavers
system. Modern vehicles feature complex electrical
• Audio amplifiers
components. Working with such connections can
be dangers for laymen. An incorrect connection can
damage your vehicle and cause situations hazard-
ous to you and other persons.
Once connected the unit may sound an alarm, which
is normal.