Table of Contents
Advertisement
Always make sure that the ground where you want
to stand up is perfectly flat and firm, without
obstacle or object which might damage stability of
the wheelchair and safety of the user.
Seating and standing assessment
Please comply with the vertical positioning protocol which
has been prescribed by your physical therapist. It is
essential that your Action Vertic is perfectly adapted to
your morphology. All necessary adjustments are describe
in the Service Manual, contact your authorized dealer for
complete assessment.
1. Seat depth adjustment: correct position of center of
knee A, seat depth too short B, seat depth too long C.
2. Stand up position adjustment: correct alignment of
ankle/knee/hip joint A, knee joint hyper extended B,
incomplete knee extension C.
1648806-B.00
All the seating and standing assessment, the chest
and knee cushions, posture belt and calf straps
adjustment must be carried out by an authorized
dealer with assistance of a multi-disciplinary team of
qualified health advisors.
Standing up
After applying the safety procedures, you can stand up.
1. Position your forearms on armrest tubes
2. Operate raising/lowering button A upwards.
3. Stand up progressively (in stages) until the prescribed
vertical angle.
The persons around you and yourself will be advised
that you are using the stand up function by a long
"beep" (one tone).
Using the wheelchair
35
Advertisement
Table of Contents
