sauermann Si-TI3 User Manual
Hide thumbs
Also See for Si-TI3:
- Quick start manual (20 pages) ,
- Quick start manual (6 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for sauermann Si-TI3
Summary of Contents for sauermann Si-TI3
- Page 1 USER MANUAL Si-TI3 INFRARED THERMOMETER www.sauermanngroup.com...
-
Page 2: Instrument Description
1 - Instrument description The Sauermann Si-TI3 is a non- LCD screen contact infrared thermometer measuring instrument. °C/°F Unit key In addition to the measurement of Lock key infrared temperature, the Si-TI3 also measures ambiant temperature. Mode key Infrared lens... -
Page 3: Safety And Environment
• Only carry out maintenance and repair work that is described in the documentation. Follow the detailed steps when doing so. Use only original spare parts from Sauermann. • If the device falls or in case of similar inconveniences, or if an irregular malfunction appears, please do not use the device and bring it back to your distributor to ensure your own safety. - Page 4 © 2020 Sauermann. All rights reserved. Sauermann & Si-HVACR Measurement MobileApp are the exclusive property of Sauermann. Non contractual document. The products functionalities and visual appearances can be modified without prior...
-
Page 5: Technical Specifications
3 - Technical specifications Parameters Measuring units Accuracy* Measuring range Resolution ±(2% of value +2°C) ±(-2% of value +4.3°F) Infrared From -40 to +500°C 0.1°C °C / °F from -40 to 32°F temperature From -40 to 932°F 0.1°F ±(2% of value +3°F) from 32 to 932°F Ambient From 0 to 50°C... - Page 6 5 - Distance from target Infrared thermometers measure the surface temperature of an object. Make sure that the target is larger than the spot size. To get a correct reading make sure that between the instrument and the object being measured there is no particles of dust or dirt, no humidity (rain, steam) and no gases.
- Page 7 8 - Operating instructions Insert the batteries current emissivity, emissivity to set, max • Remove the batteries cover. temperature, min temperature, difference between max and min temperatures, • Insert the 2 alkaline batteries LR03 AAA average temperature, high alarm, low 1.5 V.
- Page 8 To reset it, please wait 15 seconds for auto shut-off, then remove the batteries and wait for a minimum of one minute. Reinsert the batteries and press any key to turn the device on. If the error message remains, please contact Sauermann for further assistance.
-
Page 9: Operating Principle
Batteries The thermometer incorporates visual low battery indication as follows: Battery OK: measurements are possible Battery low: batteries need to be replaced, measurements are still possible Battery exhausted: measurements are not possible. When the low battery icon is displayed, batteries should be replaced immediately with AAA, 1.5V batteries. -
Page 10: Maintenance
11 - Maintenance Change batteries • With the device turned off. • Remove the batteries cover • Remove used batteries and insert new batteries (2 alkaline batteries AAA LR03 1.5 V) respecting the polarity. • Put back the batteries cover. Clean the instrument •... - Page 11 Sauermann Industrie Sauermann Italia SA ZA Bernard Moulinet Via Golini 61/10 24700 Montpon 40024 Castel S.Pietro Terme (BO) France T. (+39)-051-6951033 T. +33 (0)5 53 80 85 00 F. (+39)-051-942254 services@sauermanngroup.com info.italy@sauermanngroup.com Sauermann NA Sauermann Ibérica 140 Fell Court, Ste. 302 C/Albert Einstein 33.
Need help?
Do you have a question about the Si-TI3 and is the answer not in the manual?
Questions and answers