ILLUSTRATED DESCRIPTION OF OPERATIONS This product is an equipment for manually welding metals by PROGRESS 1700 L / POTENZA TIG 170 HF/, TIG DC 200 means of heat generated by an electric arch. HF - TIG AC/DC 200 HF - TIG AC/DC 250 HF (FIG. 1,2,3 y 4)
ENGLISH Pos. 15 Nominal value of supply tension CONTROL PANEL TIG AC/DC 200 HF - TIG AC/DC 315 HF Pos. 16 Maximum nominal supply current (FIG. 5 y 6). Pos. 17 Maximum effective supply current Pos. 18 IP degree of protection 1.
Page 8
ENGLISH • Disconnect power input or stop the motor before installing or SMOKE and GASES may be dangerous. servicing this equipment. Welding produces smoke and gases. Breathing in these gases • Install equipment and connect it to ground in accordance with and smoke may be dangerous for your health.
Page 9
ENGLISH • Be alert to that weld sparks and hot materials from the welding NOISE may injure your inner ear. operation may pass through small cracks or openings in adjacent areas. • The noise of some processes or equipment may harm your inner ear.
ENGLISH • Reduce the working cycle or current before welding again. • Make sure that the welding machine is installed and grounded in accordance with this manual. • Do not block or filter the airflow to the unit. • If there still is interference, the operator has to take extraordinary measures, such as moving the welding machine, use shielded FLYING SPARKS may cause injuries.
ENGLISH 4.3.- Setting operations with one finger against solid 12.5 mm ø or larger foreign bodies. The equipment is prepared for working within a temperature range from -15ºC to 70ºC, taking into account the limitation of a All Steyer Welding machines contain a complex electronic system decrease in performance (duty cycle) as of ambient temperatures and come completely calibrated ex works, so that, for the sake above 40ºC.
“advanced TIG welding”. kind of welding. Model PROGRESS 1700 L requires a TIG torch (not included, For example, for penetration welding where the risk of the STAYER references 38.71 and 38.73) with a direct connection to...
Page 14
ENGLISH SETTING OF THE WELDING TYPE 2.- Welding metals or heat-sensitive finishing. 3.- Welding materials with risk of twisting. The 4 modes are selected by pushing button 15. Pulsed TIG consists in transforming the flat and continuous 1.- Shielded electrode direct welding current of the standard TIG into a periodic square The machine operates as a standard electrode welding machine current of two levels that is generated by a micro-processed...
Page 15
ENGLISH 6.- Regulations In turn, the alternating mode (AC) mode may be pulsed to provide special features, such as facilitating drop-per-drop filling, caloric 6.1.- Technical features control or improved surface finishing. This mode produces pure square wave without any passing time and excellent cleanliness. = tension input DIAGNOSIS TIG AC/AC: = current input...
Page 16
Área Empresarial Andalucía - Sector 1 C/ Sierra de Cazorla, 7 28320 - Pinto (Madrid) SPAIN Email: sales@grupostayer.com Email: info@grupostayer.com www.grupostayer.com...
Need help?
Do you have a question about the PROGRESS 1700 L and is the answer not in the manual?
Questions and answers