Toro Groundsmaster 7200 Service Manual page 187

Disassembly (Fig. 8)
1. Loosen and remove hex bolts (item 4), socket head
screws (item 15) and hex nuts (items 5 and 6).
2. Slide inner and outer stators from sleeves and sta-
tionary actuator.
3. Inspect parking brake components. Replace com-
plete brake assembly if excessive wear or damage to
any component is detected.
Groundsmaster 7200/7210
Assembly (Fig. 8)
1. Position stationary stator on level work surface.
2. Assemble brake components in order using Figure
8 as a guide.
3. Secure brake assembly with hex bolts (item 4), sock-
et head screws (item 15) and hex nuts (items 5 and 6).
Torque fasteners to values identified in Figure 8.
Page 6 – 11 Chassis