Buttons And Functional Discription - Profi-pumpe INVERT-TECH 3 Operating Instructions Manual

4 English
l By pressing the "
short press of the "
" button reduces the pressure by 0.1 bar each, holding the buttons causes the pressure to
rise or fall quickly.
l Open the water tap after setting the pressure, the control system regulates the pump accor-
ding to the water demand. Check that the pump is running normally and that the pressure
shown on the display is constant. If this is the case, the installation is complete. If you notice
any irregularities, please read the point 10. RECOGNISING AND REPAIRING OF
MISTAKES.

6. BUTTONS AND FUNCTIONAL DISCRIPTION

" or " " key, the setpoint value of the working pressure can be set; a
" key increases the pressure by 0.1 bar each time. A short press of the "
NO.
1
2 Performance bar One bar corresponds to 10% of the power.
3
4
5
6
7
8
9
10
11 Temperature unit Lights up when querying temperature.
12
13
14
15
16 Decrease button
17
18
Key function and display description
NAME DESCRIPTION
Rotor Icon The rotor icon rotates while pumping.
Online Icon Appears as soon as more than two pumps are working.
Lock icon Pressure or speed control is blocked.
Bluetooth Not applicable.
WiFi Not applicable.
Shows the current pressure value in bar.
Current value
The pump stops at 0.0 bar.
Auto-Mode Automatic constant voltage control mode.
Manu-Mode Manual speed control mode.
Displays the manually set pressure value.
Set value
The factory default value is 3 bar.
Speed unit Wird im manuellen Modus angezeigt.
Pressure unit Wird im automatischen Modus angezeigt.
Fault icon Leuchtet mit dem entsprechenden Fehlercode auf.
Pressing the key increases the pressure by 0.1 bar
Increase button each time, holding the key down causes the pressure to
increase rapidly.
Pressing the key descrease the pressure by 0.1 bar at a
time, holding the key down causes the pressure to drop
rapidly.
STOP button Switches the pump off.
Starts the pump in manual or automatic mode (with
RUN button
constant pressure).