Honeywell PROINDMV Installation And Setup Manual page 4

Indoor motion viewer

page of 4

/ 4
Bookmarks

Physical properties

Dimensions ....................................................................................................................................................................................................... 4.92 x 2.05 x 1.81 in (125 x 52 x 46mm)

Weight ................................................................................................................................................................................................................... 5.82 oz.(165g) – includes 3 batteries

Material ............................................................................................................................................................................................................................................................... ABS 5VB

Tamper ......................................................................................................................................................................................................................................... Wall and cover tamper

Installation / Mounting

Mounting height ........................................................................................................................................................................................................................................ 7ft. 6in. (2.3m)

Application ................................................................................................................................................................................................. Mounting on Wall -On Flat Wall or in Corner

Environmental

Operating temperature ....................................................................................................................................................................................................... 14° to 131°F (-10° to +55°C)

Max relative humidity............................................................................................................................................................................................................... 93%, without condensing

Physical Protection .................................................................................................................................................................................................................................... IP30 and IK04

Standards and Approvals

915MHz FHSS – PROINDMV

Certifications

USA FCC Part 15C (FCC47 CFR Part 15)

CANADA IC (RSS-247, Issue 1)

FCC ID: ................................................................................................................................................................................................................................. CFS8DLPROINDMV

IC: ................................................................................................................................................................................................................................................ 573F-PROINDMV

HVIN: .................................................................................................................................................................................................................................................... PROINDMV

The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or User's Manual. Unauthorized changes or modifications could void the user's

authority to operate the equipment.

FCC CLASS B STATEMENT

This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following statement for your information:

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and

television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

If using an indoor antenna, have a quality outdoor antenna installed.

•

Reorient the receiving antenna until interference is reduced or eliminated.

•

Move the radio or television receiver away from the receiver/control.

•

Move the antenna leads away from any wire runs to the receiver/control.

•

Plug the receiver/control into a different outlet so that it and the radio or television receiver are on different branch circuits.

•

Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA CLASS B STATEMENT

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC / IC STATEMENT

This device complies with Part 15 of the FCC Rules, and Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2)

This device must accept any interference received, including interference that may cause undesired operation.

Cet appareil est conforme à la partie 15 des règles de la FCC et exempt de licence RSS d'Industrie Canada. Son fonctionnement est soumis aux conditions suivantes: (1) Cet appareil ne doit pas causer

d'interférences nuisibles. (2) Cet appareil doit accepter toute interférence reçue y compris les interférences causant une réception indésirable.

Warning - The antenna(s) used for this device must be installed to provide a separation distance of at least 7.8 inches (20 cm) from all persons and must not be co-located or operating in conjunction with

any other antenna or transmitter except in accordance with FCC and ISED multi-transmitter product procedures.

Exposition aux Frequences Radio: La/les antenne(s) utilisée(s) pour cet émetteur doit/doivent être installée(s) à une distance de séparation d'au moins 20 cm (7,8 pouces) de toute personne et ne pas

être située(s) ni fonctionner parallèlement à tout autre transmetteur ou antenne, excepté en conformité avec les procédures de produit multi transmetteur FCC et ISEDs.

Responsible Party / Issuer of Supplier's Declaration of Conformity: Ademco Inc., a subsidiary of Resideo Technologies, Inc., 2 Corporate Center Drive., Melville, NY 11747, Ph: 516-577-2000

For the latest documentation and online support information, please go to:

https://www.security.honeywellhome.com/hsc/resources/wa/index.html

For patent information, see https://www.resideo.com/patent

The product should not be disposed of with other household waste. Check for the nearest authorized collection centers or authorized

recyclers. The correct disposal of end-of-life equipment will help prevent potential negative consequences for the environment and

human health.

Installation physical protection - system shall be installed in area not publicly accessible, this includes wiring protection as well

Any attempt to reverse-engineer this device by decoding proprietary protocols, de-compiling firmware, or any similar actions is strictly prohibited.

Ê800-25313A*Š

800-25313A 8/19 Rev A

FEDERAL COMMUNICATIONS COMMISSION & INDUSTRY CANADA STATEMENTS

SUPPORT, WARRANTY, & PATENT INFORMATION