Door Lock Operation Report Value; Battery Level Report - ID Lock FW 1.6 Technical Manual

11. Door Lock Operation Report Value

The Door Lock Operation Report contents is as follows.
COMMAND_CLASS_DOOR_LOCK_V2
Door Lock Mode
Door Condition

12. Battery Level Report

The battery level report, when a user request the current battery level on the ID
Lock, Z-Wave responds this level by Battery Level Report command.
And when low battery occurs, it reports this by the same command.
Battery Level
If battery level is below a given value, low battery warning is reported (0xFF).
If Z-Wave Module is requested the battery level it repost 0x00~0x64 with the battery
level command class. The actual battery level is updated and sent after each unlock
operation.
Note: There is a short delay on the report sent after unlock operation.
ID Lock
ID Lock Z-Wave Module Technical manual for FW 1.6
Parameter
Parameter
0x00 – 0x64
idlock.no
Value
0x00 Door Unsecured
0xFF Door Secured
0x00 Locked/Opened
0x01 Locked/Closed
0x02 Unlocked/Opened
0x03 Unlocked/Closed
Value
Battery Level (0 ~ 100 %)
0xFF Indicates low battery warning
idlock.no/zwave
Description
Description
th
June 20 2019
22