Huawei pBTS3701 User Manual page 8

1 pBTS3701 User Guide
Figure 1-6 LEDs of the pBTS3701
Table 1-2
Table 1-2 LEDs of the pBTS3701
Label
RUN/ALM
LINK
PWR
1.1.3 Cables of the pBTS3701
This describes the cables of the pBTS3701. The pBTS3701 requires two kinds of cables: the
power cable and the Ethernet cable.
1-6
lists the LEDs of the pBTS3701.
Status
ON (red)
Blinks once
every 0.25
seconds (Green,
ON for 0.125s ,
OFF for 0.125s)
Blinks once
every 2 seconds
(Green, ON for
1s , OFF for 1s)
OFF
ON (Green)
Blinking
(Green)
OFF
ON (green)
OFF
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
Description
An alarm is generated, indicating that the board is running
in the faulty status.
The board is being loaded.
The board is running normally.
There is no power input, or the board is faulty.
The pBTS3701 is connected to the network normally.
The pBTS3701 is in IP packets transmission.
The pBTS3701 is not connected to the network.
Power supply to the pBTS3701 is functional.
No power is supplied to the pBTS3701.
Issue ()