Table of Contents
Advertisement
Connection
Before connection
•
Read the owner's manual of the device you are connecting to the projector.
•
Some computers cannot be used with or connected to this projector.
Check for an RGB output terminal, supported signal
•
Turn off the power of both devices before connecting.
•
The figure below shows sample connections. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Computer
Computer
(for control)
p.56
To
To RGB
RS-232C
output
terminal
Control cable
RGB cable
(supplied)
Audio cable
(not supplied)
Audio cable
(not supplied)
To audio input
To audio
White (L)/Red (R)
output
Audio amplifier, etc.
, etc.
p.53
Computer
Video recorder, etc.
To DVI
output
To video
output
DVI cable 29-pin
(not supplied)
Audio cable
(not supplied)
To DVI output
To audio output
To audio output
Audio cable
DVI cable 29-pin
(not supplied)
(not supplied)
Audio cable
(not supplied)
S-video cable
(not supplied)
Audio cable
(not supplied)
Monitor cable
Mini D-sub
To audio
15P-BNC
output
To Y/C
/C
B
R
(not supplied)
White (L)/
output
Red (R)
Green (Y)/Blue
(C
B
)/Red (C
R
)
To S-video
Conversion adapter
output
BNC-pin (not supplied)
Video recorder, etc.
Video recorder,
DVD player, etc.
22
Notes
•
The MONITOR OUT terminal outputs analog RGB signals from the COMPUTER 1 IN
terminal or the COMPUTER 2 IN terminal, or outputs Y/P
the INPUT button. If no input is selected, the MONITOR OUT terminal outputs the input
signals last selected for each input terminal. (Digital RGB signals will not be output.)
•
Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
•
A computer monitor cannot accept Y/P
•
The AUDIO (L/R) terminal doubles for devices connected to S-VIDEO terminal and
VIDEO terminal.
•
When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
•
/P
signals as selected with
B
R
/P
signals correctly.
B
R
23
Advertisement
Table of Contents
