Connecting To An Audio System Equipped With Analog Audio Inputs - Toshiba SDP95S Owner's Manual

Connecting to an audio system equipped with analog audio inputs

Connect an audio system equipment to
1
the AV OUT jack of this player.
To AV OUT
Audio/video cable
(supplied)
To analog audio inputs
Red (Right)
White (Left)
Audio/video cable
(not supplied)
Yellow (Video)
No need to connect.
SDP95SWN_E_53-80.indd 63 SDP95SWN_E_53-80.indd 63
Caution
• When you connect the player to other equipment, be sure to
turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• Turn off the amplifier before you connect or disconnect the
player's AC adapter. If you leave the amplifier power on, the
speakers may be damaged.
• The output sound of the player has a wide dynamic range.
Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by
Signal flow a sudden high volume sound.
Notes
• Refer to the owner's manual of the connected equipment as
well.
• If you place the player near a tuner or radio, the radio
broadcast sound might be distorted. In this case, place the
player away from the tuner and radio.
AUDIO IN
Audio system
R
L
63
2011/02/18 16:43:19 2011/02/18 16:43:19