VTech GearZooz Gear Up & Go Activity Table Parents' Manual page 9

4 To play with the gear board side, turn the table over and lay it flat
on the floor. Then, press and hold the purple button and turn the
screw anticlockwise once. You can then release the purple button
and continue to turn the screw anticlockwise to loosen it. Repeat
this step for the other assembled leg. Next, Flip the table back over.
The gear board can be rotated so it is flat, or at an angle. Position
the table to the angle you would like, then reconnect and secure the
assembled legs to the table (refer to step 2 for instructions).
Repeat these steps to return to the activity centre side.
4
8
8
8