VTech GearZooz Gear Up & Go Activity Table Parents' Manual page 8

2. Insert the screw bolt into the hole on top of the assembled legs,
then insert the end of the screw bolt into one side of the table as
shown in the picture. Firmly push the screw bolt into the table
until it clicks into place. Then, turn the screw clockwise until you
hear a click sound to secure the leg to the table.
Repeat these steps with the other assembled leg.
2
3. Align and insert the monkey into
the round hole as shown in the
picture. You will hear a click when it
is secure.
3
7
7
7