Functional Overview - Toshiba DR570KU Owner's Manual

FUNCTIONAL OVERVIEW

Front Panel
1
( * ) The unit can also be turned on by pressing these buttons.
1. I/y ON/STANDBY button
Press to turn on the unit, or to turn the unit into the
•
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
• If timer programmings have been set, press to set
the unit to timer-standby mode.
2. Disc tray
Place a disc when the disc tray is opened.
•
3. A OPEN/CLOSE button*
• Press to open or close the disc tray.
4. Infrared sensor window
Receive signals from your remote control so that you
•
can control the unit from a distance.
5. SKIP H button
During playback, press once midway through a
•
chapter or track to go back to the beginning of
the current chapter or track. When pressed twice
in quick succession, playback will start from the
preceding chapter or track.
During playback, press and hold for 1.5 seconds to
•
fast reverse.
When playback is paused, press to play back reverse
•
step by step.
• When playback is paused, press and hold for 1.5
seconds to slow reverse.
6. SKIP G button
During playback, press to skip to the next chapter or track.
•
During playback, press and hold for 1.5 seconds to
•
fast forward.
Rear Panel
1
12
1. ANTENNA IN jack
• Use to connect an antenna.
2. VIDEO IN jack (L1)
Use to connect external device with an RCA video
•
cable.
3. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or other
•
device with an RCA video cable.
4. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
5. HDMI OUT jack
Use an HDMI cable to connect to a display with an
•
HDMI compatible port.
6. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
Unplug this cord from the AC outlet to completely
•
shut down the unit.
7. COAXIAL DIGITAL AUDIO OUTPUT jack
• Use to connect an AV receiver, Dolby Digital decod-
er, DTS decoder or other device with a digital audio
coaxial input jack with a digital audio coaxial cable.
E7SC0UD_D-R570KU_EN_v1.1.indd 11 E7SC0UD_D-R570KU_EN_v1.1.indd 11
2 3*
DR570
2 3 4 5
11 10 9 8 7
4 5 6 7
15 14* 13 12
• When playback is paused, press to play back
advance step by step.
When playback is paused, press and hold for 1.5
•
seconds to slow forward.
7. Display
Refer to "FRONT PANEL DISPLAY GUIDE" on page 17.
•
8. HDMI indicator
• Lights up and indicates the HDMI video resolution
when HDMI output is on.
9. DV IN jack (L3)
Use to connect the DV output of external device
•
with a DV cable.
10. AUDIO input jacks (L2)
• Use to connect external device with an RCA audio
cable.
11. VIDEO input jack (L2)
Use to connect external device with an RCA video
•
cable.
12. S-VIDEO input jack (L2)
• Use to connect the S-video output of external device
with an S-video cable.
13. I REC button
Press once to start a recording. Press repeatedly to
•
start one-touch timer recording.
14. B PLAY button*
Press to start or resume playback.
•
15. C STOP button
• Press to stop playback or recording.
8. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
9. AUDIO OUT jacks
Use to connect a TV monitor, AV receiver or other
•
device with an RCA audio cable.
10. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device
with an S-video cable.
11. AUDIO IN jacks (L1)
Use to connect external device with an RCA audio
•
cable.
12. ANTENNA OUT jack
Use to connect an RF coaxial cable to pass the signal
•
from the ANTENNA IN to your TV.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
8
11 10 9
6
EN EN
2009/04/06 11:15:23 2009/04/06 11:15:23
11 11