Overview Of The Remote Control; Automatic Tuning - Toshiba HDR5010KB Quick Start Manual

r

Overview of the Remote Control

q 3$
w 3#
e 3@
r
t 3!
y
3)
u
2(
i 2*
o 2&
1) 2^
2%
1! 2$
1@ 2#
1# 2@
1$
1% 2!
1^
2)
1& 1(
1*
*Once the remote control has
been programmed to operate your
equipment.
HD5010KB Quick Start Guide.indd 2
TV - Switches the TV on/into Standby*.
q
DTT - Switches the viewing mode to DTT.
w
HDMI 1 - Switches the input mode to HDMI 1.
e
0-9 - Selects channels, enter PIN.
r
AD - Switches Audio Description on or off.
t
SUB - Displays subtitles (if available).
y
+/− - Adjusts the TV's volume*.
u
PIP - Enters Picture In Picture mode.
i
CLOCK - Displays the clock.
o
GUIDE - Switches the Electronic Programme Guide (EPG)
1)
on/off.
BACK - Returns to the previous level in the menu. Exits EPG, Info
1!
and menu (first level).
LIB - Displays the Library of recorded programmes.
1@
MENU - Displays/exits the menu.
1#
- Pauses and resumes live TV. Plays and pauses recordings in
1$
the Library.
- Stops playback when viewing recordings. Stops recording.
1%
- Skips back 30 seconds when viewing a recording or watching
1^
live TV. Press and hold to skip to the start when viewing a recording
or skip to the start of the pause buffer when watching live TV.
- Rewinds live TV and recordings. Press repeatedly to increase
1&
the rewind speed.
Coloured buttons - Selects options in digital text/EPG/Channel List/
1*
menu.
- Fast forwards recordings. Press repeatedly to increase the fast
1(
forward speed. When pausing live TV or recordings, press to watch in
slow motion.
- Skips forward 30 seconds when viewing a recording. Press and
2)
hold to skip to the end when viewing a recording.
2! - Records live TV. Sets highlighted programmes to timer record in
the EPG.
TV INPUT - Switches between the available TV input modes (eg DTT,
2@
HDMI or AV).*
TIMER - Displays the Timers screen.
2#
TEXT - Displays digital text (if available).
2$
OK/ / / / - Displays the Channel List/confirms a selection
2%
(OK button). Navigate the EPG/menu/Channel List/Info menu
( / / / buttons).
INFO - Displays programme and recording information.
2^
SAVER - Displays the screen saver.
2&
TV/RAD - Switches between Digital TV channels and Digital Radio
2*
channels.
- Turns the TV's sound on/off*.
2(
Ch. +/ − - Selects the next/previous channel.
3)
- Returns to the previous channel watched. Switches between 4
3!
and 24 hours advance in EPG.
HDMI 2 - Switches the input mode to HDMI 2.
3@
USB - Switches the input mode to USB.
3#
STB - Switches the Digital TV recorder on/into Standby.
3$
t

Automatic Tuning

1. Ensure the aerial is plugged into this unit.
2. Once the unit has powered up for the first time, the following menu is displayed. Press the [OK]
button to continue.
Note:
• On initial startup there is also an option available to access advanced setup by pressing the [RED] button before tuning starts. Press
the [BACK] button to return to the tuning screen.
3. The Digital TV recorder will now scan and store all available channels. Depending on the quality of
your reception, this may take several minutes. Please be patient and do not press any buttons.
Note:
• If no channels are found, a message is displayed asking you to check your aerial. Confirm that your aerial is connected correctly and
press the [OK] button to restart automatically tuning.
4. Once automatic tuning has finished, you may see a region preference screen similar to the one
shown below. Select the region that is best for your area by pressing the [RED] button, or to get
further regions press the [OK] button (if available).
5. A summary screen, like the one below, is shown. Press the [OK] button to exit the automatic tuning
process.
Congratulations the Digital TV recorder is now ready to use.
U-MAN-002-09 © 2010 Toshiba Corporation. Printed in UK 78-010-043-10
22/07/2010 10:46