Timer Programming - Toshiba D-R410KU Owner's Manual

3
Use [K / L] to enter the date, then
press [B].

Timer Programming

Date Start
New Program
Date
JAN/02
L1/L2
L1
JAN/01
Daily
MON-SAT
MON-FRI
SAT
FRI
SUN
JAN/31
4
Use [K / L / { / B] or [the Number
buttons] to enter the start and end
time, then press [B].
New Program
Date
JAN/02 12 : 00AM
L1/L2
L1
• You cannot make a program whose recording
time exceeds 12 hours.
5
Use [K / L] to select an appropriate
external input (L1/L2) to which your
cable box/satellite box is connected,
then press [B].
New Program
Date
JAN/02 12 : 00AM
L1/L2
L1
E7K7AUD_D-R410KU_EN.indd 37 E7K7AUD_D-R410KU_EN.indd 37
TIMER RECORDING
TUE JAN/01 10:00AM
End L1/L2
Start End
- - : - - - - : - -
Mode
SP
SP 2 : 00
1/1
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
Start End
- - : - -
Mode
SP
SP 2 : 00
1/1
Start End
1 : 00AM
Mode
SP
SP 1 : 00
1/1
6
Use [K / L] to select a recording
mode.
New Program
Date Start
JAN/02 12 : 00AM
L1/L2 Mode
L1 SP
Refer to "Recording Mode" on page 30.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Date Start
JAN/02 12 : 00AM
L1/L2 Mode
L1 SP
Auto recording mode select...
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
New Program
Date Start
JAN/02 12 : 00AM
L1/L2 Mode
L1 Auto
• "Auto" is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
7
Press [ENTER] when all items are
entered.
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
"Timer program overlapped" appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
"Checking, canceling, or correcting the timer
programming information" on page 38.
8
Press [I/y ON/STANDBY] to set a
timer programming.
will appear on the front panel display, while this
unit waits to make the recording.
End
1 : 00AM
SP 1 : 00
1/1
End
1 : 00AM
SP 1 : 00
End
1 : 00AM
Auto 1 : 00
1/1
EN EN 37 37
2007/12/14 15:03:08 2007/12/14 15:03:08