Checking, Canceling, Or Correcting The Timer Programming Information - Toshiba D-RW2SU Owner's Manual

Recording
Timer Recording (cont'd)
Checking, canceling, or correcting
the timer programming
information
1) Press [I/y ON/STANDBY].
indicator disappears from the front panel display.
2) Press [TIMER PROG.].
Timer Programming list will appear.
3) Check the information on the list to be edited.
Timer Programming
Date Start
1. JAN/01 12:57AM 1:57AM
2. ---
3. ---
4. ---
4) To clear the timer programming:
Using [K / L], select your desired program.
Press [CLEAR].
To correct the timer programming:
Using [K / L], select your desired program. Press
[ENTER].
Then, correct the timer programming by using
[K / L / { / B].
Press [ENTER] again.
5) Press [TIMER PROG.] to exit.
6) Press [I/y ON/STANDBY] to return to the timer
standby mode.
To stop the Timer Recording in process:
Press [STOP C] on the front panel of the unit.
[STOP C] on the remote control is not effective.
66 EN
Recording_UD.indd 66 Recording_UD.indd 66
End CH Mode
CH8 XP
If the timer program did not complete correctly,
the error number appears in the Timer
Programming list.
Timer Programming
Date Start End
1. JAN/01 12:57AM 1:57AM
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
Press [CLEAR] to erase the selected
program.
Each error number means:
E1-22 Recording error E35
E37-39 other than below
E36
E23-24 Unrecordable disc
E25-28 Copy prohibited E40
program
E29 Disc protected
E30 Disc full
E31-32 Already 99 titles
recorded
E33 Already 999 E41
chapters recorded
E34 No space for E42
Control information
• A program with the error number is grayed and
asterisked in the Timer Programming list.
• Once the Timer Programming list with error line(s)
is displayed, or after canceling and setting the timer
standby mode again, the program line(s) with error
will be cleared.
• When the timer programming list with error line(s)
is displayed by pressing [TIMER PROG.], pressing
[TIMER PROG.] again will clear the timer
programming.
Note
• Press [TIMER PROG.] to check the timer programming in
progress.
When the Timer Recording is proceeding, that program
will be highlighted in red.
CH Mode
CH8 E22
PCA full
Already finalized
Video format disc
Some portion has
not been recorded
because of
program
overlapping.
Recording did not
start at the start
time.
Power failed
No disc when
recording
2006/01/11 16:28:39 2006/01/11 16:28:39