Recording (Vcr) Recording A Tv Program - Toshiba SD-V393SU Owner's Manual

Recording (VCR)
Recording a TV program
Recording and viewing the same TV program.
Recording a TV program
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
1 Load a cassette tape with the erase prevention
tab intact.
The DVD/VCR will automatically turn on.
2
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and "SP" or "SLP"
will appear on the screen for about 4
seconds.
3
Select "TV" or "CABLE" to the appropriate
position .
27
34
2H20101A (E)p32-37
00 : 00 : 00 SP
TV - VHF/UHF channels
CABLE - Cable TV channels
34
4
Press Number buttons or CH +/– to select the
channel to be recorded.
TV mode direct channel selection:
All channels can be instantly selected by using two
buttons. (for example, to select channel 2, press "0", then
"2". If you press only "2", channel selection will be delayed
for two seconds.) For channels 10 and above, press the 2
digits in order.
CABLE mode direct channel selection:
1-9 Press 0 twice and then 1-9 as required.
Example: To select "2", Press 002.
10-12 Press 0 first and then the remaining 2 digits in
order from left to right.
Example: Press 012 for "12".
13-99 Press 2 digits in order.
Example: Press 22 for "22".
100-125 Press the 3 digits in order.
Example: Press 110 for "110".
VHF/UHF/CABLE TV CHANNELS
TV
VHF
2-13
UHF
14-69
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
95-99 (A-5) (A-1)
100-125 (100)(125)
5
Press REC/OTR.
" " will appear on the screen
for about 4 seconds and "REC" will
appear on the display window.
2/10/05, 7:33 PM
VCR DVD
CH +/–
REC/OTR
SP/SLP
0–9
+0
CABLE TV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
86-94 (86) (94)
01 (5A)
CH 110
INDEX