Connecting To A Stereo System - Toshiba SD-K780KU Owner's Manual

Connections
Using S -VIDEO Jack
Use the S - Video cable to connect the DVD player' s
A
S-VIDEO jack to the S-VIDEO jack on the TV(cable
not supplied).
To hear the sound of this DVD Player through your
B
TV, use the audio cables (white/red) to connect
AUDIO OUT (L/R) jacks of the DVD player to the
corresponding AUDIO IN jacks on the TV.
Set Video Out to S-VIDEO to enable output of
C
S-Video signal (see page 18 {Video Out}).
Tip:
-Using S-Video and Component Video jacks in
combination is not recommended when you connect
to television.
(1)Connect the Audio out (L/R) cables .
(2)Press "SETUP" button on the remote control .
(3)Select "Video Out" in "Video".
(4)Select "S-VIDEO".
(5)Connect a S-Video cable.
Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.
MAINS

Connecting to a Stereo System

MAINS
Stereo system has Dolby Pro Logic or Right/Left
Audio In Jacks
Select one of the video connections (CVBS VIDEO
A
IN, S-VIDEO IN or COMPONENT VIDEO IN)
depending on the options available on your TV.
B Use the audio cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the stereo system .