JDS Uniphase HA9 Series User Manual page 67

A valid numeric parameter was received, but the required parameter type is not numeric.
-130 Suffix error
An error was detected in the suffix sent with the command, but the parser cannot be more
specific.
-134 Suffix too long
The suffix sent with the command was more than 12 characters long.
-140 Character data error
An error was detected in a character type parameter, but the parser cannot be more specific.
-141 Invalid character data
An invalid character was detected in a character-type parameter.
-144 Character data too long
A character-type parameter contained more than 12 characters.
-200 Execution error
An execution error has occurred, but the control block cannot be more specific.
-220 Parameter error
An error was detected in a parameter, but the control block cannot be more specific.
-221 Settings conflict
A valid parameter was received, but it cannot be used due to the current state of the
attenuator.
-222 Data out of range
A valid parameter type was received, but it is out of range for the attenuator.
-223 Too much data
A block-, expression-, or string-data type was too long for the attenuator to process.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Programming Guide – 61