JDS Uniphase HA9 Series User Manual page 66

-109 Missing parameter
Fewer parameters were received than the command or query requires.
-110 Command header error
An error was detected in the command header, but the parser cannot be more specific.
-111 Header separator error
A character that was not a valid header separator was encountered.
-112 Program mnemonic too long
The command header contained too many characters.
-113 Undefined header
The command header has the correct syntax but is not defined for the attenuator.
-114 Header suffix out of range
The suffix was incorrect.
-120 Numeric data error
An error was detected in a numeric data element, but the parser cannot be more specific.
-121 Invalid character in number
An invalid character was found in a character-type parameter.
-123 Exponent too large
The exponent in a decimal numeric value was greater than 32,000.
-124 Too many digits
The mantissa in a decimal numeric value had more than 255 digits.
-128 Numeric data not allowed
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Programming Guide – 60