JDS Uniphase HA9 Series User Manual page 68

-224 Illegal parameter value
A valid parameter type was received, but it did not match any of the permitted values.
-240 Hardware error
A command cannot be executed due to a hardware error, but the control block cannot be more
specific.
-300 Device-specific error
A device-specific error occurred, but more specific information is unavailable.
-310 System error
An instrument system error has occurred.
-313 Save/recall memory lost
The non-volatile data saved by the command *SAV has been lost.
-330 Self-test failed
The device failed a self-test.
-350 Queue overflow
The error queue has overflowed, and an error has occurred that cannot be recorded.
-400 Query error
A query error was detected, but the parser cannot be more specific.
-410 Query interrupted
An interrupted error occurred; for example, an attempt was made to read the output queue
before a query had been received.
-420 Query unterminated
An unterminated error occurred; for example, a new program message was sent before the
response to a previous query was read.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Programming Guide – 62