Utrid-16 Start Options - LogTag Recorders UTRID-16 Product User Manual

UTRID-16 Start Options

During configuration with LogTag
the UTRID-16 starts taking temperature readings.
... via Push button
l
temperature readings after you have gone through a specific start
sequence of pressing and releasing the
Starting the Recorder
... via Date/Time start
l
temperature readings at the date and time you specify (local
time).
When you choose the push button start option, you can select to
record pre-start readings
If you select pre-start
l
soon as it is unplugged from the USB port
so until you start the unit. No alarms are processed while pre-
start readings are being taken, pre-start readings will not appear
in the PDF file, and no PDF file will be generated. Using pre-start
readings is a good way do avoid data loss if you forget to start the
unit, as you can stillaccess the data using LogTag
If you configure the UTRID-16 to start after a delay period, the
l
recorder will not immediately record temperature readings after
you have pressed
START
instead, and record readings only after the timer has ended. It
will, however, continue to take pre-start readings, if enabled.
You cannot combine a date/time start with pre-start readings or the
start delay function.
4
The first pre-start reading is taken one log interval after you unplug the unit from
the USB port.
Find Quality Products Online at: Page 7 of 21
®
Analyzer you can decide when
start: The recorder will start taking
START
/Mark
on page 1).
: The recorder will start taking
or Begin recording after a delay.
readings, the UTRID-16 starts recording as
4 and will continue to do
® Analyzer.
, but start a countdown timer
/Mark
GlobalTestSupply
www.
button (see
UTRID-16 Product User Guide, Revision 1, copyright © 2004-2016,
®
.com
sales@GlobalTestSupply.com LogTag Recorders . All rights reserved.