Advertisement
A
D
1
B
C
E
1
2
3
4
Controls
A.
Cutoff frequency.
B.
Filter slope. The lower
position corresponds to a
12 dB/octave slope (2-pole),
the upper position to a rounder
24 dB/octave (4-pole). The BP
and LP outputs are affected.
C.
Resonance. Goes up to
self-oscillation.
D.
Input 1 level, with a tasty
analog soft-clipping.
E.
FM Attenuverter. Adjusts
the amount and polarity of
frequency modulation from the
corresponding CV input.
Inputs and Outputs
1.
Audio inputs. Input 1 goes
through a soft-clipping circuit,
while input 2 is always clean.
2.
CV inputs for cutoff modula-
tion, resonance, cutoff modula-
tion with V/Oct tracking.
3.
Voltage controlled gain for
the LP output.
4.
HP, BP and LP filter out-
puts. The slope of the HP out-
put varies with the resonance.
Advertisement
