Advertisement
D-Series Whirlpool User Manual with Bluetooth
Once a Bluetooth device has been "paired" the system will automatically connect when both Bluetooth devices are activated. If there is
more than one device "paired" to the system, the system will randomly choose one of the devices. If the system automatically connects
to an undesired "paired" device, deactivate the Bluetooth function by pressing the Music button, then press and hold the Music button
for 3-seconds, and then the Bluetooth symbol will start to flash and the system will be placed in scan mode.
Turn off and on the Bluetooth function or open Bluetooth function on the device for connection and pairing with the "Whirlpool".
Sound volume can adjust using the parameter setting buttons set into 9 different volume levels.
Air Bubble Feature:
To activate the Air Bubble feature, turn on the Display and then press the Air Bubble button. To deactivate the Air Bubble feature,
press the Air Bubble button again, or turn off the Display.
The Air Bubble feature will turn on independent of the water-level sensor, and is designed to automatically turn off after 20-minutes of
continuous use. However, if the water-level sensor changes condition from sensing-water to not-sensing-water, the air bubble feature will
shut off automatically. After which, the Air Bubble icon will start to flash. If the Air Bubble feature is still desired, press the Air Bubble button
to turn on the Air Bubble feature. If the water jet feature and the air bubble features are started at different times, both features will
automatically shut off at the same time, and the 20-minute timer is reset to the last inputted update.
The Air Bubble feature is designed to run for 1-minute to flush and dry the air jets, 20-minutes after the water-level sensor no longer
detects water, but will only do so in the following scenarios:
Water is no longer detected by the water-level sensor while the system is still turned on
1.
Water is no longer detected by the water-level sensor and then the system is turned off
2.
The system is turned off and then the water-level sensor no longer detects water.
3.
Page 7 / 9
Advertisement
