Advertisement
D-Series Whirlpool User Manual with Bluetooth
Heatpump Feature:
The heatpump function will remain locked-out until both the water jet feature is turned on and the water-level sensor is activated. The
waterlevel sensor is activated when the tub is filled and the water level inside the tub surpasses the height of the water-level sensor. If
the waterlevel sensor does not sense water at a safe water level both the heatpump and water pump will turn off. The heatpump
function also has a thermostat feature in which you can set a desired temperature also which the heatpump will activate. The default
temperature of the thermostat is set at 38°C (100.4°F). You can change the thermostat setting between 35°C (95°F) to 43°C (109.4°F).
If the temperature of the tub water is above this set temperature of the thermostat, the heatpump feature will not activate. Because this
system is a "tub" designed to use fresh water for each use, this system uses a "heatpump" system; as it is not a "pool" in which is
designed to continuously use chemically treated water which uses a water "heater" system. "Heatpump" systems are designed to
produce just enough heat to prolong the warmth of a tub of water, but not specifically designed to heat a pool of water to a normal "spa"
operating temperatures. This is designed to be safer and more efficient for household use.
To adjust the thermostat setting for the heatpump function, ensure there is adequate water level; press the heatpump button so that
the
heatpump feature is on, and then press the Parameter Setting button Up or Down until the desired setting is selected. To turn off
the heatpump feature, simply press the heatpump button until the icon is unlighted or off. If the whirlpool system is shut off with the
heatpump running, the system will delay the shutdown process for a few short seconds until the heatpump slightly cools.
Music Feature:
While the computer system is on, press the Music button to activate either the FM radio or Bluetooth functions. When the radio
function is selected, a "3 dB" will first show on the display panel, indicating a volume adjustment; to adjust the volume, press the
Volume/Parameter "UP" or "DOWN" buttons until desired volume is achieved. The volume adjustments span from "0" to "10" "dB" ("3
dB" being default). After 5-seconds the display will change to a frequency reading, indicating a frequency adjustment; to adjust the
frequency, press the Volume/Parameter "UP" or "DOWN" buttons until desired frequency is found. The system will automatically use
the last frequency selected when the radio function us used again.
To search for a new radio channel, while the radio function is in the frequency mode, press and hold either the Volume/Parameter
"UP" or "DOWN" button for 2-seconds, and it will automatically search for the next radio station with a strong/steady signal.To program
a frequency into the channel memory, press the Channel Memory button; "CH=1" will display on the screen; use the
Volume/Parameter "UP" or "DOWN" buttons to select different channel numbers (1-10); press the Channel Memory button again to
save the frequency to the channel number of your selection. To select between the preset memory channels, while the radio is
functioning, press the Memory button, then press the Set button, and then use the Volume/Parameter "UP" or "DOWN" buttons.
To select the Bluetooth function, press the Music button again, cycling past Radio feature. The Bluetooth symbol will appear on the
upper portion of the display, and "bt" near the center of the display. When first turned on, the Bluetooth feature will scan for an audio
source Bluetooth device; use your audio source Bluetooth device to scan and "pair" the connection.
The Bluetooth system is named "Whirlpool"; the password is "1234". When the Bluetooth systems "pair", the Bluetooth feature will
chime, indicating they have successfully connected.
The Bluetooth feature will only play audio output, and will not accept vocal input. If there is an incoming or outgoing call during music
streaming, the music will automatically stop playing, and will automatically continue when the call is ended. To deactivate the
Bluetooth feature, press the Music button to cycle the radio feature into the 'off' position.
Temperature: 35 ~ 43°C (95°F ~ 109.4°F)
Radio / Bluetooth
Page 6 / 9
Advertisement
