Echogear EGAV-CMIWP2 Installation Instructions

#YourGearUpgraded
IN-WALL TV Power Kit
EGAV-CMIWP2
Model
Installation Instructions
Confuzzled? Contact the ECHOGEAR Pros:
1-855-428-2490 helpmehelpyou@ECHOGEAR.com
Doc. #1412818 11/19 Rev A
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Yea, the boring stuff ...
Legrand electrical products conform to and should be properly grounded in compliance with requirements of the
current National Electrical Code or codes administered by local authorities. All electrical products may present a possible
electric shock or fire hazard if improperly installed or used. Legrand electrical products may bear the mark of a Nationally
Recognized Testing Laboratory and should be installed in conformance with current local and/or the National Electrical Code.
CAUTION:
Avoid potential personal injuries and property damage!
● RISK OF FIRE AND SHOCK - Only intended for use on 15 amp branch circuits.
● RISK OF FIRE - DO NOT install power supply cord within the wall cavity.
● RISK OF FIRE AND SHOCK - DO NOT connect this box with any other circuits or outlets.
● Do not use this product for any purpose not explicitly specified by manufacturer.
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
● If you do not understand these instructions or have doubts about the safety of the installation, assembly
or use of this product,
FIND THAT SWEET SPOT
1
Up to 6 feet
Outlet Height
Up to 6 feet
6901-602435.indd 1
CUTTING TEMPLATE
IMPORTANT SAFETY INSTRUCTIONS
but read it, so you don't jack things up!
contact The Echogear Pros at 855-428-2490 or www.echogear.com.
CUTTING TEMPLATE
Grab Your Tools
Pencil
Tape
Stud Finder
Measure
Phillips
Screwdriver
TRACE
2
T O Y
S U RPRI SE
Inside Every Box
Level
Drywall
Saw
Slotted
Screwdriver
CUT IT OUT
3
11/6/2019 11:15:03 AM