Echogear EGAV-CMIWSB Owner's Manual

IN-WALL SoundBAr Power
+ Cable Management KIT
#YourGearUpgraded
Model
"Wanna show o your hard work?
Share a picture of your completed
project with #YourGearUpgraded.
Who knows, it might not be
as bad as you thought"
Confuzzled? Call the ECHOGEAR Pros:
1-855-428-2490 helpmehelpyou@ECHOGEAR.com
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
but read it, so you don't jack things up!
Yea, the boring stuff ...
CAUTION:
Avoid potential personal injuries and property damage!
● Please read through these instructions completely to be sure you're comfortable with this easy install process.
● Do not use this product for any purpose not explicitly specified by manufacturer.
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
● If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
contact The Echogear Pros at www.echogear.com.
of this product,
WARNING:
RISK OF FIRE AND SHOCK. Do not connect the modules
CAUTION:
RISK OF FIRE AND SHOCK. ONLY intended for use on 15 ampere branch circuits.
Do not install power supply cord within wall cavity.
03
This product conforms to and should be properly grounded in compliance with requirements of the current National
Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire hazard if improperly installed or used. This product may bear the
mark of a Nationally Recognized Testing Laboratory and should be installed in conformance with current local and/or the
National Electrical Code.
WHAT'S IN THE BOX
Upper Module
02
Soundbar
Module
01
Lower Module
03
Milestone AV Technologies and its a liated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete.
However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every
possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without
notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein.
Milestone assumes no responsibility for accuracy, completeness or su ciency of the information contained in this document.
©2018 Milestone AV Technologies. All rights reserved. ECHOGEAR is a Milestone brand. ECHOGEAR and the ECHOGEAR logo are trademarks of Milestone.
Milestone Global Headquarters 6436 City West Parkway; Eden Prairie, MN 55344 USA
EGAV-CMIWSB
OWNERS GUIDE
or to any other circuits or outlets.
01 02
WARNING: —
DON'T FEED TO CHILDREN
small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts
are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service. Never use damaged parts!
TOY S UR P RIS E
Splitter Cord
Inside Every Box
04
Drywall Saw
06
Power Cord
05
Driver Bit
07
(hole saw)
Grab Your Tools
Tape Measure
Verify Wall Compatibility
Verify TV Plug Fit
BEFORE DRILLING ANY HOLES:
Make sure your TV plug fits in the
upper module
fits in soundbar module
v
STEP 1
a
Assemble Hole Saw
This product contains
b
Cut Holes
07 08
Hole Saw
08
3 in.
06
1022089
06/18
Pencil Electric Drill Phillips Screwdriver
This Cable Kit is designed to fit
into both interior and exterior walls
constructed with:
3 in.
Minimum Space into Wall:
1/2 in.
Minimum Drywall Thickness:
and your soundbar
02
.
01
Make Some HOLES
07
07
TIP: Drill the top hole BEHIND your TV and
the soundbar hole BEHIND your soundbar.
2X
1X
C U T T IN
G
T E M P L
A T E
Maximum Distance: 6 feet
Paint (optional)
Surfaces are paintable
to match your decor
Back Wall
NOTE: Walls
with blown-in
type insulation
Stud
may require
removal of some
insulation inside
Drywall the cavity.
MAX: 1 ⅛ in. (29 mm)
01
02
08
Maximum:
3 feet
Maximum:
4 feet
1–5/8 in.