Blocking Programs By Ratings - Toshiba 32A15 Owner's Manual

3. Press or to display the V-CHIP menu.
CH
PICTURE AUDIO SETUP OPTION
V-CHIP
BLOCKING RESET
PIN CODE
SELECT [0-9] SET
END EXIT
4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
CH
PICTURE AUDIO SETUP OPTION
V-CHIP
ENABLE BLOCKING ON OFF
SET RATING START
BLOCKING OPTION START
NEW PIN CODE START
SELECT ADJUST
5. You may now enable blocking. See "To change your PIN code"
(below), "Blocking programs by ratings" (below), "Blocking unrated
movies or programs" (page 22), and "Locking channels" (page 22).
To change your PIN code:
1. Press MENU, then press
2. Press L or M to highlight V-CHIP.
3. Press or to display the V-CHIP menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press L or M to highlight NEW PIN CODE and press
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0–9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.

Blocking programs by ratings

The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters also
employ a rating system to qualify the content of television programs.
The MPAA, TV, and Youth TV ratings work with the V-Chip feature and
allow you to block programs according to the rating limits you set.
J3N51721A(E)_P17-28
ENTER
or to display the OPTION menu.
19
Note:
If you forget your PIN code, press RECALL
four times within five seconds from the V-CHIP
menu. This resets your PIN code and allows
you to proceed to the BLOCKING menu.
or to
POWER
TV
1 2
4 5
7 8
CH +
VOL
MENU/
–
ENTER
CH –
EXIT RECALL TV/VIDEO
VOL CH RTN
RESET CAP/TEXT
DISPLAY DVD CLEAR TOP MENU
CODE MTS SLEEP
19
21/04/2005, 6:05 AM
VCR CABLE
DVD
3
+10
6 100
Channel
Numbers
9 0
VOL
+
Menu/
Enter
Recall
FAV
Exit
FAV
1/2
DVD MENU
MUTE