Recoil Replacement
Recoil Removal
Recoil Inspection
Engine Top End: Service and Repairs
1. Remove the 3 (10 mm) acorn nuts securing the recoil assembly to the top of
the engine. Remove the recoil assembly.
2. Remove the fuel tank vent hose from the hose retainer on the engine shroud.
Move the carbon canister to the side of the engine.
3. Remove the shroud by lifting away from the engine.
1. Check the recoil dogs for excessive wear.
Figure 6
Figure 7
Page 4–6
1P65F-2 Service Manual
3429-270 Rev A