Toro 1P65F-2 Service Manual page 129

Connecting Rod Removal (continued)
1P65F-2 Service Manual
3429-270 Rev A
4. Remove the shroud by lifting away from the engine.
5. Loosen the nut securing the crankshaft to the engine.
6. Unhook the spring from the brake mechanism.
7. Place a pry bar under the flywheel to pry the flywheel upwards. Use a soft
based hammer, to loosen the flywheel assembly from the crankshaft, only
striking the top of the nut to prevent crankshaft damage.
Figure 165
Figure 166
Page 7–31 Compression System: Service and Repairs