Options - AEG FEE83701PM User Manual

Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Start.
• The indicators
off.
• The indicator
flashes.
• The display shows the current
setting: e.g.
– The levels of rinse aid range
2. Press Start repeatedly to change the
setting.
3. Press on/off to confirm the setting.
6.4 AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically
and remains ajar.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
and
= level 4.
are from 0A to 6A where level
0A means no rinse aid is used.
are
AirDry is automatically activated with all
still
programmes excluding
applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Delay.
• The indicators
• The indicator
• The display shows the current
2. Press Delay to change the setting.
3. Press on/off to confirm the setting.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
programme ends.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
are off.
still flashes.
setting.
– = AirDry is deactivated.
– = AirDry is activated.
The Option button toggles
between the available
options and their possible
combinations.
ENGLISH 11
(if
and