Connecting A Pc (Personal Computer) - Toshiba 20HLV16 Owner's Manual

Connecting a PC (personal computer)

Before you connect this TV/DVD to your PC, change the adjustment of
your PC's Resolution and Refresh rate. See "Monitor display modes"
on right.
Connect one end of a (male to male) VGA cable to the video card of
the computer and the other end to the VGA connector PC at the side of
the TV/DVD. Fix the connectors firmly with the screws on the plug. In
case of a Multimedia computer, connect the audio cables to the audio
outputs of your Multimedia computer and to the AUDIO L and R
connectors of the PC IN jacks of the TV/DVD.
Set the video input source to PC mode (see "Selecting the video input
source" on page 31 and "Picture/Audio adjustments in the PC mode"
on page 43). The TV/DVD can be used as a computer monitor.
Computer
5X20601A(E)P11-21 20
Audio
output
Audio cable
Conversion adapter (if necessary)
You will need:
• one VGA (15-pin) computer cable
• one PC audio cable
Monitor display modes
Mode Resolution
VGA 640x480
VGA 720x400
WVGA 848x480
SVGA 800x600
XGA 1024x768
WXGA 1280x720
WXGA 1280x768
WXGA 1360x768
TV/DVD
Notes:
back panel
• Some PC models cannot be connected to
this TV.
• An adapter is not needed for computers with a
DOS/V compatible mini D-sub 15-pin terminal.
• The on-screen displays will have a different
appearance in PC mode than in TV mode.
• If your PC display output corresponds to a
WVGA or a WXGA resolution as indicated in
the chart above (example: WXGA 1360 x
768), you must set the WVGA INPUT or
WXGA INPUT to the ON position in the PC
Picture menu in the TV (see page 43).
NOTE: DO NOT CONNECT A
PC USING THE HDMI INPUT.
ALWAYS use the VGA port provided to connect a PC.
20
17/3/06, 12:23 PM
Refresh rate
60Hz
70Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz