Zooming; Locating Desired Scene - Toshiba 20HLV16 Owner's Manual

Zooming

DVD
This unit will allow you to zoom in on the frame image. You can then
make selections by switching the position of the frame.
1. Press ZOOM during playback.
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM
1 (x 1.3), 2 (x 1.5) and
2. Press / / / to view a different part of the
frame.
You may move the frame from the center position to UP, DOWN,
LEFT or RIGHT direction.
3. In the zoom mode, press ZOOM repeatedly to return to a 1:1 view
( Off).

Locating desired scene

Use the title, chapter and time recorded on the DVD disc to locate the
desired point to playback. In the case of VCD/CD discs, track and time
are used to locate the desired point to playback.
To check the title, chapter/track and time, press DISPLAY.
1. Press JUMP during playback or resume
stop mode.
2. Press or to select the "Time",
"Title/Track" or "Chapter".
3. Press Number buttons (0–9) to input
the number.
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4. Press ENTER. Playback starts.
• When you change the title, playback starts from Chapter 1
of the selected title.
• Some discs may not work in the above operation.
5X20601A(E)P44-55 47
VCD CD
3 (x 2.0).
DVD VCD CD
Title
Chapter
Time
Title
Chapter
Time
Title
Chapter
Time
1
Notes:
• You can select the Pause, Slow or Search
playback in the zoom mode.
• Some discs may not respond to zoom
feature.
Jump
Jump
Jump
12
Note:
In case of the Video-CD playback with PBC,
the JUMP does not work. To turn off PBC, see
page 53.
47
17/3/06, 12:25 PM
ZOOM
Number
buttons
JUMP
DISPLAY
ENTER
CANCEL