Storage - Walvoil DPC130X Service Manual

DPC130X
General specifications
WARNING
• Never use the control valve at a pressure exceeding the rated pressure in order to avoid to breack it;
• use the control valve within the rated flow in order to avoid malfunction or a deterioration in the heat balance. If the control
valve is used beyond the verified working conditions range, we shall not be responsible for any accident which may accur;
• do not use low-cleanless hydraulic fluid in order to avoid seal failure or damage to seal parts, which could cause the machine
operation failure or an operation mistake;
• use the control valve at the environmental conditions specified in the previous datasheet. If the Control Valve is used outside
the specified range, we shall not be responsible for any accident which may occur;
• Use the control valve with the working fluid specified in this manual. If the control valve is used beyond the specified range or
with different working fluid properties, we shall not be responsible for any accident which may occur.
For any doubt please contact our After-sales Department.
All the material installed by the manufacturer are in accordance with UNI CEI EN ISO 80079-36:2016
O-ring seals
Cast iron
& Parback
Cast iron EN-GJl-250 NBR 70 Sh
Cast iron EN-GJL-300 VITON 75 Sh
Cast iron EN-GJV-300 NBR 90 Sh
Teflon (PTFE)
Poliurethane

Storage

______________________________________________________________________________________________________
Do not store the Walvoil product:
• in places where it could be damaged;
• outside a temperature and pressure range specified in environmental datasheet (see pag.7);
• where it could get wet;
• where it could come in contact with organic solvents, acids, alkalis and/or dangerous gases;
• in places subject to sudden, significant temperature changes;
• in zones where a potential explosive atmosphere can occur also with a very low probability.
• remove the packaging only just before assembling the product;
WARNING
• Walvoil is not responsible for any damage due to a storage not in compliance with our prescriptions;
• for any doubt, please contact our After-sales Department.
10
___________________________________________________________________________________
Spring steel
AISI 302
VDSiCr EN10270-2
FDCrSI
Quench Steel
AISI 302
AISI 316
OTEVA 60
OTEVA 70
Other steel Other
11SMnPb37 Sint. A50
16CrNi4Pb
36SMnPb14
35SMnPb10
Class B Steel
INOX Steel
INOX A2/304 Steel
X10CrNiS1809
3CD60 Steel
Class 8.8 Steel
Class 10 Steel
Class 10.9 Steel
Class 12.9 Steel
C43
ETG100
Fe37
MIM 4605
Sint. C39
Sint. D35
Service Manual
D1WWTD02E