Built-in speakers status /
DTV signal strength
For the 26LV610U-T model only, you can choose to turn off the built-in TV
speakers when an external audio amplifier is connected.
When in digital TV mode you can view the digital signal strength and adjust the
antenna accordingly.
Turning off the built-in speakers
(26LV610U-T model only)
N
Press MENU in the TV mode. Press
select "Audio", then press
MENU
SETUP
O
Press
to select
on the bottom of the
screen, then press ENTER. This will display the
second page of the Audio menu screen.
P
Press
or
to select "Speaker", then press
or
to select "Off".
Q
Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL
To turn on the built-in speakers, select "On" in
step 3 above.
Checking the digital TV
signal strength
N
or
to
Press MENU in the digital TV mode. Press
or ENTER.
MENU
SETUP
O
P
to select "Channel", then press
Press
or
to select "DTV Signal", then press
or ENTER.
The Signal Meter screen will appear displaying the
signal strength for the current digital channel. If
necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Note: The Signal Meter feature is not available for
analog channels. The Signal Meter screen will
automatically close after about four minutes.
Press EXIT/CANCEL to return to the normal
screen.
EXIT/
CANCEL
ENTER
/ / /
EXIT/CANCEL
MENU
or
or ENTER.
49