Related Manuals for Campbell CM225
Summary of Contents for Campbell CM225
- Page 1 Solar Radiation Sensor Mounts Revision: 10/20 Copyright © 2016 – 2020 Campbell Scientific, Inc.
-
Page 2: Table Of Contents
Table of Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to specific sections. 1. Introduction..............1 2. Precautions ..............2 3. Initial Inspection ............2 4. Overview ..............2 5. -
Page 3: Introduction
This mount includes the leveling base required by smaller sensors such as the Apogee CS301. The CM225 is designed to be mounted either horizontally to a crossarm or vertically to a mast or a pole to keep the mounting plate level. The CM255 and CM256 can also be mounted horizontally or vertically, but include a 90°... -
Page 4: Precautions
Campbell Scientific. Overview Campbell Scientific solar radiation sensor mounts provide a stable mounting platform for a pyranometer, quantum sensor, or radiometer. The flexibility in these designs allows a sensor to be mounted to a horizontal crossarm, or to a vertical mast or tower. -
Page 5: Specifications
Mounts to U-bolt in bottom holes CM202, Consists of a CM202SS, rectangular plate, CM203, CM204, CS300 , LI200X mounting bracket, and CM225 CM204SS, or LI200S , LI190R mounting hardware. CM206 crossarm LI190SB , CMP3, Solar Sensor Dimensions are CMP6 , CMP11... - Page 6 Solar Radiation Sensor Mounts Mount Description Compatible Sensors Mounts to –SP option: MS-40/60/80, 1: Small mount plate MS-40M/60M/80M, 2: Large mount plate Includes leveling SR30, SR05, SR11, 3: VU01 or MV-01 plate screws that allow SR15, SR20-T2, 4: CVF4 plate leveling in a horizontal CM202, SR20-D2, SP Lite 2,...
-
Page 7: Installation
(42.0 in), and weight is 2.5 kg (5.5 lb). Retired sensors may also be compatible. Contact Campbell Scientific for more information. A leveling base is required to mount the CS300, LI200X, LI200S, LI190R, or LI190SB. Assumes the CMP6, CMP11, and CMP21 are not housed in the CVF4 Heater/Ventilation Unit. -
Page 8: Installation
Visually inspect the leveling feet on the sensor (if present) to ensure all feet are in contact with the mounting bracket. CM225, CM255, 015ARM CM226 NOTE: These holes contain #8-32 threads. -
Page 9: 015Arm And Cm255 Showing U-Bolt Mounting
Secure the mounting bracket to the crossarm or the vertical pole using the hardware included with the mounting bracket. The CM225, CM255, CM261, and 015ARM use one or two U-bolts, nuts, flat washers, and lock washers to mount the bracket (FIGURE 6-3). -
Page 10: Cm256 (Cm275 Inset)
Solar Radiation Sensor Mounts The CM256 and CM275 bracket (FIGURE 6-4) use two set screws to secure the crossarm or the pole in the channel at the base of the bracket. For pyranometers mounted horizontally, ensure the mounting bracket is horizontal in two dimensions. -
Page 11: Maintenance
Solar Radiation Sensor Mounts Verify all mounting hardware is firmly tightened, and that the mounting bracket is at the desired angle. The CM256, CM261, and CM275 include leveling bolts for additional adjustment of the pyranometer level. Maintenance Periodically (at least yearly) check for wear and damage, and take necessary corrective actions. - Page 12 See Product Details on the Ordering Information pages at www.campbellsci.com. Other manufacturer's products, that are resold by Campbell Scientific, are warranted only to the limits extended by the original manufacturer. Refer to www.campbellsci.com/terms#warranty...
- Page 13 Decontamination” form and comply with the requirements specified in it. The form is available from your CAMPBELL SCIENTIFIC regional office. Campbell Scientific is unable to process any returns until we receive this statement. If the statement is not received within three days of product receipt or is incomplete, the product will be returned to the customer at the customer’s...
- Page 14 Dispose of spent batteries properly. WHILE EVERY ATTEMPT IS MADE TO EMBODY THE HIGHEST DEGREE OF SAFETY IN ALL CAMPBELL SCIENTIFIC PRODUCTS, THE CUSTOMER ASSUMES ALL RISK FROM ANY INJURY RESULTING FROM IMPROPER INSTALLATION, USE, OR MAINTENANCE OF TRIPODS, TOWERS, OR ATTACHMENTS TO TRIPODS AND TOWERS SUCH AS SENSORS, CROSSARMS, ENCLOSURES, ANTENNAS, ETC.
- Page 15 Campbell Scientific regional offices Australia France Thailand Location: Garbutt, QLD Australia Location: Vincennes, France Location: Bangkok, Thailand Phone: 61.7.4401.7700 Phone: 0033.0.1.56.45.15.20 Phone: 66.2.719.3399 Email: info@campbellsci.com.au Email: info@campbellsci.fr Email: info@campbellsci.asia Website: www.campbellsci.com.au Website: www.campbellsci.fr Website: www.campbellsci.asia Brazil Germany Location: São Paulo, SP Brazil...