STAIRCASE LIGHTING TIMERy ASH-01
DESCRIPTION
The staircase lighting time delay
switch ASH-01 is used to control lighting
devices on staircases and corridors. After
releasing the system it switches on the
lighting for the preset time by the user.
After that it switches off automatically.
The operating time can be adjusted from
10 sec to 10 min by means of a potentio-
meter. The staircase lighting time delay
switch ASH-01 can be used as standard
time delay relay. The hermetic casing
(IP65) secures the device functioning in
unfavorable weather conditions.
FEATURES
یStaircase lighting control,
یoperating time adjustment from 10
sec to 10 min,
یcooperation with monostable push-
buttons equipped with illumination
lamps,
یcooperation with 3-wire or 4-wire in-
stallation,
یcable connection 0,5 m long,
یhermetic casing (IP 65),
یvoltage relay output max 16 A capa-
city.
The device is designed
for single-phase instal-
lation and must be in-
stalled in accordance
with standards valid in
CAUTION
a particular country. The
device should be con-
nected according to the details included
in this operating manual. Installation,
connection and control should be car-
ried out by a qualified electrician staff,
who act in accordance with the servi-
ce manual and the device functions.
Disassembling of the device is equal
with a loss of guarantee and can cause
electric shock. Before installation make
sure the connection cables are not un-
der voltage. The cruciform head screw-
driver 3,5 mm should be used to instal
the device. Improper transport, stora-
ge, and use of the device influence its
wrong functioning. It is not advisable to
instal the device in the following cases:
if any device part is missing or the de-
vice is damaged or deformed. In case
of improper functioning of the device
contact the producer.
Zakład Mechaniki i Elektroniki
ZAMEL sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com, e-mail: marketing@zamel.pl
TECHNICAL PARAMETERS
Power supply cables: L (black), N (blue)
Input rated voltage: 230 V~
Input voltage tolerance: from -15 to +10 %
Nominal frequency: 50 / 60 Hz
Rated power consumption: 48 mA
Release / output (load) cables: brown, grey (connected inside)
Time adjustment range: from 10 sec to 10 min
Time accuracy adjustment: ±10 %
Time repeatability adjustment: ±5 %
Output relay parameters: 16 A / 250 V AC1 4000 VA
Number of switch cables: 4
Section of connecting cables: 4 x 1,50 mm
Connecting cable length: 0,5 m
Ambient temperature range: from -20 to +45
Operating position: vertical, pointed down
Protection degree: IP65 (PN-EN 60529)
Overvoltage category: II
Rated impulse withstand voltage: 1 kV (PN-EN 61000-4-5)
Reference standards: PN-EN 60669-1
APPEARANCE
INSTRUCTION MANUAL
ASH-01
Time adjustment: rotational potentiometer
2
Mounting: 2x stretcher 5x(3x30)
Protective class: II
Pollution degree: 2
Dimensions: 69 x 56 x 27 mm
Weight: 101 g
PN-EN 60669-2-1
PN-EN 61000-4-2,3,4,5,6,11
Time adjustment
Power supply cable (L)
Power supply cable (N)
Release / output (load)
cables
C
o
VER. 002_01.12.2008