Table of Contents
Advertisement
Rinse the sample cell 3 times with the water sample you are
testing and Fill the built-in sample cell.
Press ZERO/ON. The cursor will move across the display
followed by 0 PPM or PH.
Dip the eXact
®
simultaneously press READ. This starts the 20 SECOND
countdown timer. During this time move the strip in a gentle
back and forth motion (approx. 2 strokes/sec). Remove and
discard the strip after "1" on the display disappears.
The cursor will move across the display while the meter
prepares to measure the sample. reAD result displayed. After
testing is complete, rinse the sample cell immediately.
FIll, DIP, reAD
Strip Micro into the sample cell and
5
4
5
6
7
Advertisement
Table of Contents
