Casio EX-P600 Service Manual & Parts List page 13

9) The file copy starts.
(If a message "uusbd.inf cannot be found" appears during the file copy, designate the same place as
in the step 7).
10) Press "Complete" button.
11) Right-click "My computer", select "property", and then open "Device manager".
If "Universal USB Driver (VMEM manufacturer's name)","USB device for UUSBD" can be found, the
computer has successfully recognized the driver.
12) The test driver can be used for both CASIO/PENTAX. Installing the test driver into either one enables
the other one to recognize it.
* How to uninstall the USB driver for the USB test mode
• Connect the camera to the computer while in the USB test mode so that the computer recognizes
the camera.
• Right-click "My computer", select "Property" and open "Device manager".
• Select "USB device for UUSBD" , and then "Universal USB Driver (VMEM manufacturer's name)".
• Press "Delete" button to delete the driver.
• When using Windows98/98SE/Me, delete the following three files;
(NOTE! Do NOT delete "usbd.inf" and "usbd.sys", whose names are much alike the following.)
C:windows / inf / uusbd.inf
C:windows / inf / other / KashiwanoUUSBD.inf
C:windows / system32 / drivers / uusbd.sys
• The driver has been successfully deleted.
1-4. Use the USB ADJ Tool
1) Prepare ADJ tool, USB DLL and ADJ setting file in the same folder.
2) Turn the camera power on which is set in the USB test mode and let it enter the USB test mode directly
(the test menu appears right after the power is turned on).
3) Boot "adj03SSAW.exe" and use it as follows;
• To read ADJ data from the camera
Press "READ ($9)".
There is no need to set the model by "FW Item Set".
• To write ADJ data into the camera
Press "WRITE ($8)".
• To save ADJ data which is read
Select "File" and "Save All ADJ", and save it under an appropriate name.
• Open ADJ data which is saved
1. Select the model by "FW Item Set", and then press "Load FW ->" button.
2. Select "File" and "Open", and open the necessary file.
• Language" radio button can switch the language between Japanese and English in which the name
of the ADJ ITEM is displayed.
• "Radix" radio button can switch the data display between decimal and hexadecimal notations.
— 11 —