Table of Contents
Advertisement
Page 24
STORAGE
If the contactor is to be stored for any length of time
prior to installation, the following precautions should
be taken.
1. The original packing should be restored, if
possible.
2. Do not subject the equipment to moisture or
sunrays. Store in cool, clean, and dry location.
3. Place a dust cover over the contactor packaging
to protect against dirt and moisture.
4. Store in an upright position.
INSPECTION DURING STORAGE
Routine scheduled inspection is necessary if storage
is for an extended period. The unit should be checked
for condensation, moisture, corrosion, and vermin.
Prior to installation, the contactor should be carefully
examined for evidence of physical damage, corrosion,
or other deterioration. Refer to the PRE-
ENERGIZATION Section of this manual.
The MAINTENANCE section of this manual describes
various types of inspections recommended for this
contactor during the operation period.
DISPOSAL
Contact your state environmental agency for details
on disposal of electrical components and packaging
in your particular area.
SPECIFICATIONS
Advertisement
Table of Contents
