Safety Information; Product Description - Oase IR Control Set Operating Instructions And Guarantee

SAFETY INFORMATION

Only connect the unit if the electrical data of the
unit and the power supply correspond. The unit
data is to be found on the unit type plate, on the
packaging or in this manual.
Disconnect the power plug before carrying out any
work on the unit.
Never carry or pull the unit by the electrical cable.
Route cables such that they are protected from
damage and do not present a tripping hazard.
Protect the plug connection from moisture.
Warnings used in these instructions
The warning information is categorised by signal
words, which indicate the extent of the hazard.
N O T E
Indicates a possibly dangerous situation, which could
lead to damage to property or the environment, if
not avoided.
Cross-references used in these instructions
A reference to a figure, e.g. figure A.
Reference to another section.

PRODUCT DESCRIPTION

Function description
IR Control Set is a control system for up to six HighLine
Premium LED. Depending on the power consumption,
multiple HighLine Premium LED may require addi-
tional EAC Transformer. The three infra-red remote
control devices can be used to adjust the colour selec-
tion, brightness, different lighting scenarios and ef-
fects for lighting the aquarium.
Scope of delivery
A IR Control Set
1 Receiver module
2 Remote control
3 Y adapter
Permits connection of more than one High-
Line Premium LED
- EN -
15