Adjusting The Sound; Muting The Sound; Selecting Stereo/Sap Broadcasts - Toshiba TheaterWide 20HL86 Owner's Manual

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the
sound is off, the screen will display " " in the upper right
corner.
To restore the sound, press MUTE again.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to
listen to high-fidelity stereo sound while watching TV. MTS
can also transmit a second audio program (SAP) containing a
second language, music, or other audio information (when
provided by individual stations).
When the TV receives a stereo or SAP broadcast, the word
"ST.SAP", "Stereo" or "SAP" appears on-screen every time
the TV is turned on, the channel is changed, or DISPLAY is
pressed.
When the TV is in VIDEO1, VIDEO2, PC, or HDMI mode, the
options for MTS feature are L+R, L+L, R+R. Your selection
decides from which speaker the audio is output.
To listen to different sound types:
1. Press MENU/ENTER, and then press
Audio menu appears.
2. Press or to highlight MTS.
3. Press or to select Stereo, SAP, or Mono.
Audio
Sound Mode Flat
Balance
MTS Stereo
AVL Off
Speaker Out On
Audio Advanced Setting >
MENU/ENTER EXIT
You can leave your TV in Stereo mode because it will
automatically output the type of sound being broadcast
(stereo or monaural).
If the stereo sound is noisy, select Mono to reduce the
noise.
If you select SAP, You will hear the station's second
audio program (if available) from the speakers, while
viewing the original program's picture.
Note:
The operation methods mentioned above can also be applied when the
TV is in VIDEO1, VIDEO2, PC, or HDMI mode.
36
or
Audio
Sound Mode
Balance
0
MTS
AVL
Speaker Out
Audio Advanced Setting >
MENU/ENTER EXIT
until the
Flat
0
Stereo
Off
On
MUTE
MENU/
ENTER