Download Print this page
Fenwal 35-63 Manual

Fenwal 35-63 Manual

24 vac microprocessor-based intermittent pilot ignition control

Advertisement

Quick Links

SERIES 35-63
24 VAC Microprocessor-Based
Intermittent Pilot Ignition Control
FEATURES
Safe start with DETECT-A-FLAME
technology
Custom pre-purge and inter-purge timings*
Single or three trials for ignition
Mounts on standard 4-in. junction box
System diagnostic LED
Flame current test points
Local or remote flame sensing
Automatic reset option**
APPLICATIONS
Commercial cooking
Gas furnaces
Unit heaters
Water heaters
Other applications requiring intermittent pilot
DESCRIPTION
The 35-63 is a 24 VAC intermittent pilot (spark-to-pilot) ignition
control. The control uses a microprocessor circuit to provide
precise, repeatable timing and operating sequences. On-board
diagnostics with LED output makes troubleshooting easy and
ensures safe and efficient operation.
Export Information (USA)
Jurisdiction: EAR
ECCN: EAR99
Agency Certifications
Recognized under the UL component program, UL
R
372. Software certified to ANSI/UL 1998. UL File
MH8817
Design certified to ANSI Z21.20, CAN/CSA C22.2
No. 199-M89
CE Approved to EN 298:2003
Code Compliant to:
AS 4625 - 2008
AS 4622 - 2004
* Pre-purge time cannot exceed inter-purge time on CE
Approved models.
** Automatic reset is not allowed for CE Approved models.
®
flame sensing
SPECIFICATIONS
Input Power
Input Current
Main Gas Valve
Pilot Gas Valve
Operating Temperature
Storage Temperature
Flame Sensitivity
Flame Failure Response
Flame Detector Self-check
Rate
Gas Types
Spark Rate:
Size (LxWxH)
with enclosure
Moisture Resistance
Ingress Protection
Tries for Ignition
Trial for Ignition Periods
Pre-purge and
lnter-purge Timings
Control: 18-30 VAC 50/60Hz
(Class 2 Transformer)
300 mA @24 VAC with main and
pilot gas valve relays energized
(control only)
2.0A max (continuous)
2.0A max (continuous)
-40°F to +176°F
(-40°C to +80°C)
-40°F to +185°F
(-40°C to +85°C)
0.7
0.8 seconds maximum
Once per second minimum
Natural, LP, or manufactured
Remote
50/60 sparks/sec
Local
25/30 sparks/sec
5.69 x 3.94 x 1.87 inches
(14.45 x 10.01 x 4.75 cm)
Conformal coated to operate non-
condensing to 95% R.H. Module
should not be exposed to water
Not rated, protection provided by
appliance in which it is installed
One or three try versions available
15, 30, 60, 90 seconds available
0, 15, 30, 45 seconds
or 4 minutes available
F-35-63
August 2015
µ
A minimum

Advertisement

loading

Summary of Contents for Fenwal 35-63

  • Page 1 Water heaters • Other applications requiring intermittent pilot DESCRIPTION SPECIFICATIONS The 35-63 is a 24 VAC intermittent pilot (spark-to-pilot) ignition Input Power Control: 18-30 VAC 50/60Hz control. The control uses a microprocessor circuit to provide (Class 2 Transformer) precise, repeatable timing and operating sequences. On-board...
  • Page 2 Multi-try models permit three tries for ignition including inter-purges. If the pilot burner relights, normal operation resumes. If the pilot burner does not relight, the control will enter lockout. F-35-63 Effective: August 2015...
  • Page 3: Mounting And Wiring

    MOUNTING AND WIRING Wiring Diagrams - 35-63 The Series 35-63 is not position-sensitive and can be mounted vertically or horizontally. The case may be mounted on any surface with #6 sheet metal screws. The control also supports direct mounting to a standard NEC 4-in. junction box.
  • Page 4: Troubleshooting Guide

    If the control detects a software or hardware error, all outputs are turned off and the LED displays a Steady On condition. If this condition persists after an attempt to restart, then the control must be replaced. F-35-63 Effective: August 2015...
  • Page 5 5.000±.010 .475 2.250 3.375±.010 3.250±.010 3.968 .359 .063 3.375±.010 1.125 .234±.010 DIA. (2) MOUNTING .187±.010 DIA. HOLES (2) MOUNTING HOLES 2.000 MAX. 1.750 MAX. .500 MAX. Figure 4. Standard Enclosure Note: All dimensions are in inches. F-35-63 Effective: August 2015...
  • Page 6: Part Number Configuration

    All other trademarks are the property of their respective owners. Fenwal Controls, Kidde-Fenwal Inc. This literature is provided for informational purposes only. 400 Main Street KIDDE-FENWAL, INC. assumes no responsibility for the prod- Ashland, MA 01721 uct’s suitability for a particular application. The product must be Tel: 800-FENWAL-1 properly applied to work correctly.

This manual is also suitable for:

35-630200-00735-663904-113