Advertisement
O W N E R S M A N U A L
!
!
!
BYPASS
!
To assist you in finding the perfect setting for your music, a bypass switch is located on
the front of your Z-ROCK that is intended to be used as an A/B switch while you make
your adjustments. This way you can hear what it sounds like without the Z-ROCK
(bypassed) and then what it sounds like with the Z-ROCK setting you have chosen.
!
!
SPECIFICATIONS
!
!
Weight
Dimensions
Circuit type
Input voltage
Output voltage
Max Output
Output Impedance <1000 ohms
Input Impedance
Noise / Hum
Response
Feedback
Rectification
Capacitor Filter
Signal tube
Biasing
Resistors
Signal Cap
AC cord
Consumption
Input jacks
Output jacks
Warranty
!
!
!
Decware High Fidelity Engineering Co., East Peoria IL, USA www.decware.com
7 lbs. ea.
2.5" H x 6" W x 11.0" D
Single ended Class A Triode
4 volts max
8 volts with 2 volt input. 16 volts with 4 volt input
21 volts
47 K Ohms
-80dBV / -62dBV
10 Hz ~ 90 kHz
ZERO negative feedback used
UN4007 fast recovery
547 uF
12AU7
Self-Biasing
precision WW/MF by DALE, VISHAY
Polyurethane Film Caps or Beeswax Film/Foil Caps
Removable power cord
13.5 watts at the outlet
RCA type 24K Gold
RCA type 24K Gold
Lifetime to original owner
Advertisement
