Download Print this page

Decware Z-ROCK Owner's Manual page 4

Vacuum tube eq/tone shaper

Advertisement

O W N E R S M A N U A L
!
!
From 0% (fully counterclockwise) to 50% the EQ knob acts like a volume control with
no effect on frequency response. Once it is at the half way position, it achieves unity
gain which means you can flip the bypass switch on and off and hear no change in
volume or frequency balance. As you rotate past 50% the EQ slowly begins to come
in. The more EQ you use, the more bass you will have and the less highs. This
means that if you have the knob at 100% and begin to slowly back it off you will hear
the music get louder as the highs come up until you get out of the green zone at which
point it begins to get quieter again. This creates a sweet spot in the top half of the
green zone shown above where most people will find the best sound.
Decware High Fidelity Engineering Co., East Peoria IL, USA www.decware.com
!
!
These EQ curves were carefully
crafted by ear over many months of
listening, as was the overall voicing of
the Z-ROCK and it's operation which
brings us to the EQ knob located on
the front.
!
See the illustration below for what to
expect from this knob.

50%
EQ KNOB
0%
Green Zone
100%

Advertisement

loading

This manual is also suitable for:

Zrock2