Speed System; Adjusting The Speed Bar; Foot Stirrup And Leg Cover - Swing Connect Reverse Evo Instruction Manual

Speed system

The Connect Reverse Evo is designed for
use with a speed bar. The pulley required for
this is ideally positioned in order to ensure
the perfect flow of force. It is a high-quality,
smooth-running pulley.
harness ensures energy-saving and efficient
use of the speed bar.

Adjusting the speed bar

After you have set up the best seating
position, the speed system must be
Fig. 21: Installing the speed system

Foot stirrup and leg cover

Please check our website www.swing.de for
information about compatible foot stirrups
and leg covers for the Connect Reverse Evo.
Only the products named may be used.
There is a risk that the harness will be
damaged if you attach the wrong foot stirrup,
in particular one which is attached only at the
two front loops.

TIP
A video showing how to
install the speed system
and foot stirrup is online:
www.bit.ly/CREspeedbar
The cord inside the
adjusted. The pulleys required are already
on the harness.
The speed bar line is attached to the
harness as shown in Fig. 21. First it is fed
through the ring attached at the front under
the seat (1), which is attached with elastic. It
then goes through the metal eyelet (2) in the
guide channel. At its other end it goes
through the pulley (3). Now it just has to be
fed through the small ring (4) and then
attached using a Brummel hook.
23