Order Information - ABB SPAJ 140 C User Manual And Technical Description

Dimensions for
mounting

Order information

14
The relay is housed in a normally flush-mounted
case. The relay can also be arranged for semi-
flush mounting with the use of a 40 mm, 80 mm
or 120 mm raising frame, which reduces the
depth behind the panel by the same dimension.
The type designations of the raising frames are
SPA-ZX 111 for the 40 mm frame, SPA-ZX 112
for the 80 mm frame and SPA-ZX 113 for the
120 mm frame. A surface mounting case SPA-
ZX 110 is also available.
The relay case is made of profile aluminium and
finished in beige.
A cast aluminium alloy mounting frame with a
rubber gasket provides a degree of protection by
enclosure to IP 54 between the relay case and the
Panel cut-out
1. Quantity and type designation
2. Rated frequency
3. Auxiliary voltage
4. Accessories
5. Special requirements
142
30
129 ±1
Raising frame
SPA-ZX 111
SPA-ZX 112
SPA-ZX 113
Example
15 pcs relay type SPAJ 140 C
f = 50 Hz
n
U = 110 V dc
aux
15 pcs bus connection modules SPA-ZC17 MM
2 pcs fibre optical cables SPA-ZF MM 100
14 pcs fibre optical cables SPA-ZF MM 5
—
panel surface when the relay is panel mounted.
The relay case is complete with a hinged gasketed,
clear, UV-stabilized polycarbonate cover with a
sealable fastening screw. The degree of protec-
tion by enclosure of the cover is also IP 54.
A terminal strip and two multipole connectors
are mounted on the back of the relay case to
facilitate all input and output connections. To
each heavy duty terminal, i.e. measuring input,
power supply or trip output, one 6 mm
2
4 mm or one or two 2.5 mm
connected. No terminal lugs are needed. The
signalling outputs are available on a six pole
detachable connector and the serial bus connec-
tion is using a 9-pin D-type connnector.
250
216
186
a
a
176
136
96
2
, one
2
wires can be
34
b
b
74
114
154