ABB SPAJ 140 C User Manual And Technical Description page 12

12
Data transmission
Transmission mode
Data code
Selectable data transfer rates
Fibre optic bus connection modules for
powering from external power source
- for plastic core cables
- for glass fibre cables
Fibre optic bus connection modules for
powering from host relay
- for plastic core cables
- for glass fibre cables
Insulation Tests *)
Dielectric test IEC 60255-5
Impulse voltage test IEC 60255-5
Insulation resistance measurement IEC 60255-5
Electromagnetic Compatibility Tests *)
High-frequency (1 MHz) burst disturbance test
IEC 60255-22-1
- common mode
- differential mode
Electrostatic discharge test IEC 60255-22-2 and
IEC 61000-4-2
- contact discharge
- air discharge
Fast transient disturbance test IEC 60255-22-4
and IEC 61000-4-4
- power supply
- I/O ports
Spike test, class III (KEMA)
Magnetic field test acc. to IEC 60521
Power supply tests
Power supply variation
Variation voltage
Interruption 80 V - 50%
Interruption 80 V - 100%
Interruption 255 V - 100%
Mechanical tests
Vibration tests
Shock and Bump tests
Seismic tests
Environmental conditions
Corrosion test
Specified ambient service temperature range
Long term damp heat withstand according
to IEC 60068-2-3
Transport and storage temperature range
Protection by enclosure according to IEC 60529,
when the relay is panel mounted
Mass of the relay including flush mounting relay case
*) The tests do not apply to the serial port, which is used exclusively for the bus connection module.
Fibre optic serial bus
ASCII
4800 or 9600 Bd
SPA-ZC 17 BB
SPA-ZC 17 MM
SPA-ZC 21 BB
SPA-ZC 21 MM
2 kV, 50 Hz, 1 min
5 kV, 1.2/50 µs, 0.5 J
>100 MΩ, 500 Vdc
2.5 kV
1.0 kV
6 kV
8 kV
4 kV
2 kV
1 kV, 0.15/50 µs
400 A/m
68...265 V
0...200 ms
0...30 ms
0...160 ms
IEC 60255-21-1, class 2
IEC 60255-21-2, class 2
ANS/IEEE C37.98-1987
- 3.0 g in the horizontal direction
- 3.0 g in the vertical direction
Battelle-test
-10...+55°C
<95% at 40°C for 56 d
-40...+70°C
IP 54
~3.5 kg